Manufacturer
RUST-OLEUM CORPORTAION
Description
Zinsser Mold Killing Primer is a protective, water-based coating that can be applied directly over existing mold, mildew and odor-causing bacteria. Featuring a proven, registered and approved antimicrobial-fungicidal agent, it not only covers over associated stains but also kills all pre-existing fungal organisms. Use it directly on nearly any dry, debris-free, non-porous, interior or exterior surface with minimal pre-cleaning in just about any residential, commercial or industrial environment: homes, offices buildings, retail establishments, schools, hospitals, factories and more. And though this primer is compatible with any topcoat product, it pairs perfectly with Zinsser PERMA-WHITE Mold & Mildew-Proof paints. To fully cover over and obscure heavy stains, particularly those caused by water leaks, a second primer coat with a tailored, stain-blocking product may be required. In such scenarios, BIN and Cover Stain primers are highly recommended.
Specifications
Global Product Type: Building/Construction Paints & Primers
Paint Sub-Category: Primer,Water-Based
Color Family: White
Intended Application Environment: Interior/Exterior
Finish/Sheen: Flat
Number of Colors: 1
Recommended Level of Ventilation: Moderate
Volume Capacity: 1 gal
Packaging Type: Bucket/Pail
Binder/Vehicle Ingredient(s): Styrene Acrylic
Diluent/Solvent Ingredient(s): Ethylene Glycol,Water
Pigment/Dye/Filler Ingredient(s): Calcium Carbonate
Color(s): White
Application Method: Brush,Roller
Application Temperature Range: 50 to 80 F
Applicable Surface Material: Cement/Concrete,Drywall,Glass/Ceramics,Masonry,Metal,Plaster,Plastic,Wood
Maximum Coverage Area: 400 to 450 sq ft
Cure/Dry-Time Range: 30 min (Touch),1 h (Handle/Recoat),7 days (Full Cure)
Age Recommendation: Ages 16 and Up
Product Biodegradability Indicator: N
Product Biodegradability in Days: 0
Product Compostability Indicator: N
Compliance Standards: EPA Reg. No. 87469-1-69587
Pre-Consumer Recycled Content Percent: 0%
Post-Consumer Recycled Content Percent: 0%
Total Recycled Content Percent: 0%
Disclaimer Statement: Do not apply when air or surface temperatures are below 50 F (10 C) or when drying conditions are poor. Not recommended for new or unpainted metal and vinyl siding or for floors, decks and other surfaces subjected to full-immersion and/or prolonged contact with water. For optimal protection, apply topcoat product within 72 hours.
Footnote 1: Recommended Dry Film Thickness (DFT) Per Coat: 1 to 2 mil
Footnote 2: Recommended Wet Film Thickness to Achieve DFT: 2.5 to 5 mil
Country Of Origin: US
Carton Weight: 25 lbs.
Carton Pack Quantity: 2 PK
Pack Quantity: 0
UPC: 020066237912
UNSPSC: 31211509
